MIS-1000 Modular Inverter System

Model # MIS-1000

Product Description

The MIS-1000 is a ready-made inverter package designed to provide a pure sine wave AC supply as a complement to any existing DC power solution. Compact, friendly Plug & Play installation, self standing open relay rack ideal for low MTTR applications in power room. It can be used either to piggyback DC power sources or as fully integrated AC power center with built-in in and out protections. Thanks to TSI specifics it provides outstanding power conditioning and high end availability.



Product Features

  • Permanent AC to AC double conversion
  • Great disturbance rejection rate
  • Redundant AC & DC input sources
  • Source changeover not visible by the load
  • Highly efficient energy conversion
  • Preserve battery life expectancy
  • Compact footprint
  • Offers space for AC distribution or integration with 3rd party equipment
  • Operates until 65°C (de-rating may apply)
  • Can be provided with 120 VAC, 120/240 VAC and 120/208 VAC system configurations

Web-Based Software

TSI Technology - The TSI Enhanced Power Conversion mode develops a high quality AC by drawing power simultaneously from the AC mains and DC sources and presents a regenerated AC for critical application. Since the system draws power from each source simultaneously, output power is guaranteed as long as one input source is available.

  • Technical Specs
  • FAQs
  • Advantages
  • Applications

Technical Specs

General Specifications:*
Applicable Standards:IEC 61000-4 / FCC part 15 / cULus 1778 Listed / ROhS
MTBF (Each Module):240,000 hrs
Efficiency (Typical):Enhanced Power Conversion / On Line: 95% / 91%
Dielectric Strength DC/AC:4300 VDC
True Redundant Systems - Compliant:3 disconnection levels on AC out and DC in power ports
4 disconnection levels on AC in port
Vibration:GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5 – 100 Hz
0.5 g 100 – 500 Hz-1.5 g / Drop test
Altitude Above Sea:< 1500 m no derating
> 1500 m – 0.8 % derating per 100 m
Environmental:Operating / Storage Temp: -40 – 70°C (-40 – 158°F) Humitidy: 95%, non-condensing
Operating Temperature
(Ambeint and Measured at Air Inlet):
-20 – 40°C (-4 – 104°F) for rated power
40 – 65°C with 2% /°C derating
104 – 149 °F with 1% /°F derating
Operating Environment
Ingress Protection:
Free from dust and corrosive materials / NEMA 1 2
Material (Casing):Coated steel-ALU ZINC
*For the full specifications on this product, see the catalog sheet under the Downloads section of this page.

FAQs

What kinds of applications can the MIS-1000 be used for?
The MIS-1000 is convenient for any mission critical applications - a must have when any glitch matters. Typical applications for the MIS-1000 include: aggregation network infrastructure components (MGW, RNC, SSP, PTP-RL, IP/Router, etc.), HVAC equipment, and small datacenters.

What environmental conditions does the MIS-1000 safely operate in?
The operating temperature of the MIS-1000 is -20 to 40°C (-4 to 104°F) for rated power. It may also operate from 40 to 65°C (104 to 149°F) with 2% per °C (1% per °F) derating. The MIS-1000 is rated for NEMA 1 ingress protection.

What is the typical efficiency of the MIS-1000?
The MIS-1000 has a 95% Enhanced Power Conversion efficiency and a 91% On Line efficiency.

Advantages

  • Permanent AC to AC double conversion
  • Great disturbance rejection rate
  • Redundant AC & DC input sources
  • Source changeover not visible by the load
  • Highly efficient energy conversion
  • Preserve battery life expectancy
  • Compact footprint
  • Offers space for AC distribution or integration with 3rd party equipment
  • Operates until 65°C (de-rating may apply)
  • Can be provided with 120 VAC, 120/240 VAC and 120/208 VAC system configurations

Applications

  • Telecom
  • Datacom
  • Mass Transit
  • Oil & Gas
  • Utility
Request a Quote

Or call toll-free
1-877-805-3377

Request Information
  • Model #
    MIS-1000

    Description
    Modular Inverter System

Request a Quote

Or call toll-free
1-877-805-3377