MPC Modular Inverter System
Model # MPC-Inverter-System
The MPC is a readymade inverter package designed to provide a pure sine wave AC supply as a complement to any existing DC power solution.
Compact, friendly plug & play installation, self-standing open relay rack ideal for low MTTR applications in power room. It can be used either to piggyback DC power sources or as fully integrated AC power system with built-in in and out protections. Thanks to TSI specifics it provides outstanding power conditioning and high-end availability.
- More Info
Output: 120 or 120/240 or 120/208 VAC
Power: 3 – 18 kVA
|Applicable standards||IEC 61000-4 / FCC part 15 / cULus 1778 Listed / RoHS|
|MTBF (each module)||240,000 hours|
|Efficiency (typical): Enhanced power conversion / on line||95% / 91%|
|Dielectric strength DC/AC||4,300VDC|
|True redundant systems||3 disconnection levels on AC out and DC in power ports|
4 disconnection levels on AC in port
|Vibration||GR63 office vibration 0 – 100hz-0.1g|
Transport vibration 5-100Hz 0.5g 100 – 500hz-1.5g
|Altitude above sea level||<1500m; no derating|
>1500m; 0.8% / 100m derating
|Operating temperature||-20 – 40 C; -4 – 104°F for rated power|
40 – 65°C with 2%/°C derating
104 – 149°F with 1%/°F derating
|Ambient / storage temp / relative humidity||-40 – 70°C (-40 – 158°F)|
|Relative humidity||95%, non-condensing|
|Operating ambiance / ingress protection||Free from dust and corrosive materials / NEMA 1|
|Material (casing)||Coated steel-ALU ZINC|
For the full specifications on this product, see the product sheet under the downloads section of this page.
What are some common applications for the MPC Inverter System?
- Mass Transit
- Oil & Gas
- Power Utilities
- Permanent AC to AC double conversion
- Great disturbance rejection rate
- Redundant AC & DC input sources
- Source changeover not visible by the load
- Highly efficient energy conversion
- Preserve battery life expectancy
- Compact footprint
- Operates until 65°C (de-rating may apply)
- Can be provided with 120 VAC, 120/240 VAC and 120/208 VAC system configurations
Convenient for any Mission Critical Applications. A must when any glitch matters.
The solution to power up demanding AC loads at low OPEX from a combination of AC and DC sources present on site.
It reveals its full worth in harsh electrical environments and for long autonomy requirements. It handles any type of AC load including laser printers, compressors and induction motors.
Typical applications include aggregation network infrastructure components (MGW, RNC, SSP, PTP-RL, IP/Router...); HVAC equipments, small datacenter...
Or call toll-free